FACILITYYour current location: Home > FACILITY

LED Packaging Equipments:

  • WT-2330 Gold Ball Ultrasonic Welder

    • Used for wire bonding in LED packaging

  • TRY 1080 Desktop Lead-free Reflow Welding Machine

    • Used for LED bonding

  • XYZ-06 LED Suction Chamber

    • Used to pump bubbles inside silicone gel in LED packaging

  • HKD-220DJ Super Precision Dispenser

    • Used to dispense epoxy resin on LED chip in packaging

    • 0.5mm minimum dispensing diameter

  • LS·VO20 Vacuum Oven

    • Used for vacuum and heating

  • Mecular pump

    • Used to get high vacuum

LED Test Equipments:

  • HEO-200 LED Thermal Analysis System for LEDs

    • Used to measure LEDs’ thermal resistance, junction temperature and electrical parameters timely and precisely

  • T3Ster Junction Temperature Tester

    • Used for junction temperature test for LED or high power electronics

  • LED 620 Luminous Intensity Distribution Tester

    • Used for LED luminous intensity distribution test

  • ATA-1000 Auto-temperatured LED Opto-electonic Analyzer
    • Used for LED lumunous intensity test under selected temperature


  • Fluorescence Spectrometer

    • Used for  measurement of  exciation and emission spectrum of fluorescence materials

Fluid and Thermal Test Equipments:

  • FLIR SC620 Portable Thermal Infrared Imager

    • Used for temperature test

  • Photron FastCam SA2

    • Used to capture a variety of high speed phenomenon.

    • Up to 12,000 frames per second

  • HFM-4B Heat Flux Meter

    • Used for heat flux test

    • Operates at -180~200, ranges from 0 to 7000W/m2

  • Keithley 2700 Multimeter Data Acquisition System

    • Used for data acquisition

  • TC3000 Thermal Conductivity Tester

    • Used for thermal conductivity test

  • SJ400 Surface Roughometer

    • Used for surface roughness test

  • CAP 2000+ Viscometer

    • Used for fluid viscosity test

  • KRUSS Contact Angle Meter

    • Used for fluid's contact angle measurement


  • Laser Conductometer LFA467

    • Used for thermal diffusion coefficient and thermal conductivity test

    • Temperature Range: -100℃~500℃
      Thermal conductivity Range:0.1 ~2000 W/(mK)

   


  • Rotational Rheometer MCR302
    • Used for testing the basic physical properties of fluid, such as viscosity


Other Equipments:

  • CK-300 Microscope

    • Used to observe the microstructures

  • Micropump Integrated Test platform

    • Used for micropump R&D and hydraulic performance test

  • LED Online Thermal Reliability Testing System

    • Used for in-situ measurement of LED's optical degradation under accelerated life test

  • DELL PowerEdge R720 Server

    • Used for research calculation and analysis

  • Cincinnati Sub-Zero MCB-1.2 Temperature Chamber

    • Used for LED and micropump reliability test