HUANG LIANG
·Paper Publications
- [21] 王亚辉, 黄亮*, 刘翔, 李建军. 基于增材制造和锻造复合成形的TC4钛合金组织和性能研究. 稀有金属, 2021, 45(8): 897-904..
- [22] Changmin Li, Liang Huang*, Mingjie Zhao, Shiqi Guo, Jianjun Li. Hot deformation behavior and mechanism of a new metastable β titanium alloy Ti–6Cr–5Mo–5V–4Al in single phase region. Materials Science and Engineering: A, 814 (2021), 141231..
- [23] Hongliang Su, Liang Huang*, Jianjun Li, Wang Xiao, Hui Zhu, Fei Feng, Hongwei Li, Siliang Yan. Formability of AA 2219-O sheet under quasi-static, electromagnetic dynamic, and mechanical dynamic tensile loadings. Journal of Materials Science & Technology, 2021, 70: 125-135..
- [24] Mingjie Zhao, Liang Huang*, Changmin Li, Jianjun Li, Pengchuan Li. Evaluation of the deformation behaviors and hot workability of a high-strength low-alloy steel. Materials Science and Engineering: A, 810 (2021), 141031..
- [25] 谢冰鑫, 黄亮*, 黄攀, 李建军, 苏红亮. 铝合金板料电磁翻边全流程工艺研究. 中国机械工程, 2021, 32(2): 220-226..
- [26] 刘翔, 黄亮*, 王亚辉, 李建军. 基于锻件基体的增材制造工艺参数对温度场的影响. 塑性工程学报, 2020, 27(12): 37-45..
- [27] 赵明杰, 黄亮*, 李建军, 章晓婷, 李蓬川. 300M钢热扭转变形条件下的变形行为研究. 塑性工程学报, 2020, 27(11): 159-166..
- [28] 赵明杰, 黄亮*, 李昌民, 李旭阳, 李建军, 李蓬川. 300M钢的热变形行为及热锻成形工艺研究现状. 精密成形工程, 2020, 12(6): 16-27..
- [29] 赵明杰, 黄亮*, 李建军, 曾嵘, 章晓婷, 张晗, 李蓬川. 大型飞机起落架模锻件锻透性研究. 锻压技术, 2020, 45(9): 1-7, 15..
- [30] Changmin Li, Liang Huang*, Mingjie Zhao, Xiaoting Zhang, Jianjun Li, Pengchuan Li. Influence of hot deformation on dynamic recrystallization behavior of 300M steel: Rules and modeling. Materials Science and Engineering: A, 797 (2020), 139925..